Home » 4 xFUTABA HPS A700 Air 0,12s/74,0kg

4 xFUTABA HPS A700 Air 0,12s/74,0kg

€659.00

4 xFUTABA HPS A700 Air 0,12s/74,0kg

€659.00

 

DESCRIPTION

FEATURES
· Powerful S.BUS2 digital servo with metal housing and metal gearbox
· Brushless
· Hi-Voltage
· Ball bearing
· High resolution
· High repeat accuracy
· Low-wear potentiometer
· Water protected
TECHNICAL SPECIFICATIONS
· Operating voltage: 6.0 - 8.4 V
· Operating speed 60 ° (7.4 V): 0.12 s
· Actuating torque (7.4 V): 74 kgcm
· Control frequency: 50 ... 300 Hz
· Dimensions: 40.5x21x37.7 mm
DESCRIPTION
The Futaba HPS-A700 is the new high-performance servo for model aircraft. 74 kg of torque and 0.12 sec / 60 ° travel time at 7.4V are a clear announcement. In addition, a new HPS brushless motor has been developed, which remains much cooler during operation. Likewise, the power consumption is much lower than before. The new all-aluminum case has a size of 40.5 x 21 x 37.7 mm.

Programmable by S.BUS2 technology! Of course, all S.BUS2 servos can be connected to conventional receivers with PWM modulation. The addressing of the servos can be done in different ways:

1. About the S.BUS receiver
2. With the handy Programmer SBC-1
3. Via the PC-Link software with the USB adapter CIU-2
4. At the S.BUS connection of the transmitter

The following parameters are configurable:
• S.BUS channel assignment
• servo reversal
• Servo type (normal / retractable landing gear)
• soft start (on / off)
• Mode selection in case of signal failure Hold or Free
• Soft servo run (on / off)
• servo position (servo tester)
Servo-pitch adjustment +/- 300 μs (about 30 degrees)
• Servo speed, 0.39 ... 9 seconds per 45 degrees
Deadband setting (dead band)
• servo travel adjustment separated left and right, approx. 50 ... 175%
• Starting power
• Attenuation
• Holding force
• ID storage