Home » CTU

CTU

€149.00

CTU

€149.00

 

Digitech CTU is a Turbine telemetric unit with dynamic menu structure on your Jeti or Core radio.

with its endless possibiletys G sensor extra ports and Can bus extensions.

it has all you need for a safe turbine operation in your aircraft.

 

ATTENTION CTU Manual  here ,

 

 

here is some quick Pictures of the new CTU including Jeti intregation!!

1 x CAN bus (for CAN bus based sensors read more below)
2 x Engine inputs (Jetcat-Projet input / Serial input Kingtech fadec AMT etc etc)
2 x Extra EX / sensor ports to add more Jeti sensors OR you can set one as a servo output or smokepump or extra valves.
1 x USB port For upgrades
1 x SD card slot for Logging realtime your tubine and other stuff you want to log realtime.
1 x 3D G-sensor on board (up to 24G)
1 x Altimeter sensor on board (with tube connection to static port).

Will have like the old TTU:

Fuel consumption
Reset fuel counter
Full LUA app to show and voice speech for status messages comming from engine ECU.
Full array of engine parameters can be shown on your DS24/DC24, but most will probably use the LUA application.

CAN bus
this will open a complete new line of possibilities, stay tuned 

 

Contains : CTU / Servo Patch cable / Static port M3 nipple.

CHECK if you need a adaptor!!

 

 

 

 

 

 

Added : Auto throttle

Standard disabled , manual will follow. Use at own Risk.

 

Bug fix : time out sensor scan fixed at boot, please first power TX then RX.

Upgrade your TX and \RX always to latest version

NOTE:

Take out SD card after flashing for the core.

changed the Offcond and State fields to "Off cond#" and "State#"

The "Status" field has the text description. For JetCat (only!) the "status" field will show the state while engine is starting/running, once it stops, the "Status" field will show the off condition in text instead of the state.

 

 

 

 

 

 

CTU Bin goes in jeti Devices folder
Archive – 34.7 KB 2 downloads
Ctu Manual
PDF – 784.9 KB 100 downloads
CTU AT
PDF – 213.7 KB 118 downloads
Digitech Auto throttle LUA script incl kts
Archive – 2.2 MB 7 downloads
Firmware for Jeti 0.92
Archive – 94.1 KB 38 downloads
Firmware for Jeti 0.96 & AT
Archive – 130.5 KB 14 downloads
CTU firmware for Futaba
Archive – 92.6 KB 3 downloads
CTU Firmware for CORE
Archive – 126.3 KB 8 downloads
SB IAS 0 40 AUTOTHROTTLE 480 KMH
Archive – 11.1 KB 6 downloads
CTU Lua scripts and audio 1.6 JETI
Archive – 36.2 MB 47 downloads
Programmer version 2.9 Needed for programming all our hardware
Archive – 1.0 MB 6 downloads
RJ 45 Kabel CTU Adapter Lambert / OLD Fadec
PDF – 513.5 KB 26 downloads