Home » Webshop » Electronics » Jeti » Central Box

CB-200

€179.00

CB-200

€179.00

The Central Box 200 is a switchboard designed for the complete management of servos in a model with an emphasis on safety.

Click on more info for details and options

Sale!

CB-200 & 2xRsat (optional RC switch)

€259.00 €239.00
Sale!

The Central Box 200 is a switchboard designed for the complete management of servos in a model with an emphasis on safety.

Click on more info for details and options

The Central Box 210/220 is a switchboard designed for the complete management of servos in a model.

The Central Box can manage two batteries and fully supports the JETI EX telemetry system.

Up to three receivers with serial output can be connected to the Central Box.

With JETI DC/DS transmitter, the full potential of the Central Box can be used, such as an easy way to configure the Central Box, EX telemetry and DITEX servos telemetry.

Central Box 210/220 supports up to 15 servo outputs, two battery inputs and incorporates possibility to connect an RC or magnetic switch.
In addition, the Central Box 220 servo outputs are equipped with overload protection for standard servos up to 30 Kg/cm and highpower servos up to 60 Kg/cm.
Attributes • Servo overload protection on each output channel (only Central Box 220)

• Support of DITEX telemetry servos • Possibility to connect up to 3 receivers with serial interface (EX-Bus, PPM)

• Built-in Expander function for up to 3 sensors

• Input for magnetic switch or RC switch

• Two MPX battery input connectors

• 100Hz mode of servo outputs (10ms period)

• Supports EX telemetry (voltage, current, capacity and temperature measurement, ...)

• Easy settings changes via DC/DS transmitter

• Firmware updates by user

• Suitable for use with high voltage (HV) servos

• Compact size for easy installation

• Aluminum Case for Extra Cooling and

 

The Central Box 210/220 is a switchboard designed for the complete management of servos in a model.

The Central Box can manage two batteries and fully supports the JETI EX telemetry system.

Up to three receivers with serial output can be connected to the Central Box.

With JETI DC/DS transmitter, the full potential of the Central Box can be used, such as an easy way to configure the Central Box, EX telemetry and DITEX servos telemetry.

Central Box 210/220 supports up to 15 servo outputs, two battery inputs and incorporates possibility to connect an RC or magnetic switch.
In addition, the Central Box 220 servo outputs are equipped with overload protection for standard servos up to 30 Kg/cm and highpower servos up to 60 Kg/cm.
Attributes • Servo overload protection on each output channel (only Central Box 220)

• Support of DITEX telemetry servos • Possibility to connect up to 3 receivers with serial interface (EX-Bus, PPM)

• Built-in Expander function for up to 3 sensors

• Input for magnetic switch or RC switch

• Two MPX battery input connectors

• 100Hz mode of servo outputs (10ms period)

• Supports EX telemetry (voltage, current, capacity and temperature measurement, ...)

• Easy settings changes via DC/DS transmitter

• Firmware updates by user

• Suitable for use with high voltage (HV) servos

• Compact size for easy installation

• Aluminum Case for Extra Cooling and

 

Sale!

CB-400 & Magnetic Key

€599.00 €525.00
Sale!

CB-400 & Magnetic Key

€599.00 €525.00

The Central Box 400 is a switchboard designed for the complete management of servos in large to giant models with an emphasis on safety. The Central Box 400 has a unique design that provides overload protection at each servo output. An independent, very powerful BEC (battery eliminator circuit) for each battery input makes the Central Box an optimal solution to connect up to 24 servos. The Central Box 400 can manage the batteries and fully supports the JETI EX telemetry system. Up to two receivers with serial (PPM, EX Bus, UDI) output can be connected to the Central Box 400. With a JETI DC/DS transmitter, the full potential of the Central Box can be used, such as easy configuration of the Central Box, EX telemetry, and very fast servo response.

Central Box 400 supports up to 24 protected servo outputs, two battery inputs with voltage regulators and incorporates  possibility to connect an RC or magnetic switch.

 

 

Attributes

  • Two independent high-powered BEC´s for voltage stabilization of servos
  • Overload protection on each channel
  • Overload protection on Rx, Ext, and Switch outputs
  • Possibility to connect up to 2 receivers with serial interface (PPM, EX Bus, UDI)
  • Built-in Expander function for up to 4 sensors
  • Input for magnetic switch or RC switch
  • MPX battery input connectors: 2x 
  • Stabilized voltage output via a pair of MPX connectors
  • 100Hz mode of servo outputs (10ms period)
  • Supports EX telemetry (voltage, current, capacity, and temperature measurement, overload indication, ...)
  • Easy settings changes via DC/DS transmitter
  • Internal memory for storage of telemetry data
  • USB connectivity for connection to PC
  • Easy settings changes via DC/DS transmitter
  • Firmware updatable
  • Suitable for use with high voltage (HV) servos
  • Robust metal construction with mounting holes
  • LED status indication
  • Each output is individually configurable (channel assignment, trim, reverse, ATV)

 

 

Available variants:

Art. No.: J-CB-400-RS-RCSWCentral Box 400 with two satellite receivers Rsat 2 and with RC SwitchJ-CB-400Central Box 400 with magnetic key