Home » Webshop » Jeti » Jeti Voltage Regulators

here you find our collection of most sold Jeti Parts, if you do not see your Jeti part here please send a email !

Sold out

Max Bec 2D plus

€92.00 €85.00
Sold out
Sold out

Max Bec 2D plus

€92.00 €85.00

Weight [g]85Dimensions [mm]100 x 29 x 16Sustained current [A]12Peak current (max 30s) [A]20TelemetryYesOperational temperature [°C]-10 ... 130Recommended input voltage [V]5,5 - 8,4Output voltage [V]5,0 - 6,0Idle current [µA]240Max. power loss [W]20Number of battery inputs2Input voltage max. [V]

Manufactured according to very high European standards, the JETI Max BEC-2D EX is the latest dual input, linear voltage regulator from JETI.
The Max BEC 2D EX includes a magnetic switch, so there is no mechanical wear-and-tear from switching the unit on and off.

 

 

The unit comes equipped with a large heat-sink to dissipate any excess heat. In addition to its magnetic switch feature, the 2D EX is programmable by using the JETIBOX and is also Duplex 2.4EX compatible.
This allows audible alarms to be configured for low input voltage or high-temperature. When used with the Duplex 2.4EX, it also allows real-time feedback of input voltage and temperature as well as output voltage wirelessly from the JETIBOX profi.
Redundant inputs are provided for power-supply and the output features an MPX type socket, directly supporting Duplex and all Duplex EPC receivers.

 

Sold out

Sbex 30EX

€99.90
Sold out

Sbex 30EX

€99.90

ESCRIPTION

The switching voltage regulator SBEC 30D EX is supposed to function as a current supply for receivers and servos. It enables to use a wide range of input voltages from 2S up to 15S Li-XX cells. Setup of the output voltage between 5 and 8.4V is accomplished in the JETI transmitter via EX Bus connection or through JETIBOX. This implies that the SBEC is also prepared for use with new "higher" voltage servos. The SBEC 30D is suitable for medium and larger model due to its maximum current of 30A.

SBEC 30D measures input and output voltage of the BEC, current and consumed capacity of the battery. Measured data can be observed by displaying the telemetry in the JETI Duplex transmitter.